Laminated Bumpers

Note: When measuring laminated bumpers the part numbers reflect the hole to hole dimension of the mounting angles (dimension "C") not the actual bumper face width (dimension "E").

Example: MFRL410-12 =
                          4 = 4" Projection (Dimension "A")
                              10 = 10" Height (Dimension "B")
                                        12 = 12" Hole to Hole (Dimension "C")
                          Dimension "E" is noted in the part description
"Note. Any laminated bumper may be purchased with 1 or 2 mounting plates on the end of the bumper instead of the standard mounting angles. Simply add a P-1 for one mounting end plate or P-2 for two end plates, at the end of part number when ordering. EXAMPLE: MFRL-410-12-P1 would have 1 angle and 1 plate for mounting."